What are my expected speeds on Telco Gigabit?

Crazy fast gigabit speeds can be achieved when your computer is hardwired to your fiber access point. WiFi is a different animal. Know that by their nature, WiFi connections are "lossy" - they degrade. Things like distance from the router, walls, and other electronics all get in the way and lower signal strength. The weaker the signal, the slower your WiFi speed.

Average speeds based on the connection type

Note:  As fast as the Telco Gigabit connection is, sadly, it can't change the limits of wireless technology so you will not reach gigabit speeds over WiFi.

Expected performance

Here's what you can generally expect depending on your method of connectivity: 

Speed	Connection Type	Protocol	Typical real-life performance in Megabits per second (Mbps)
Best	Ethernet Cable (Cat5e or better)	Gigabit	800 - 940
		Fast Ethernet	80 - 95
Poor	2.4 GHz wireless band	wireless-G	10 - 20
Mediocre		wireless-N	20 - 70
	5 GHz wireless band	wireless-N	40 - 90
Good		wireless-AC	100 - 400

While not guaranteed, these WiFi performance figures are what you should expect when testing your connection's speed with a modern WiFi 5 router at an average distance of 15-20 ft with few-to-no physical barriers between your testing device and the router.

Router uptime

It's recommended that you reboot your wireless router periodically. This is known as "power cycling".

Why:
If you keep a computer up and running for days or weeks without powering it down, it can become slow and unstable. Restarting helps give it a fresh start, and your computer will typically run faster and with fewer issues. A wireless router is also a computer and benefits from the same process.

How:
Simply remove the router's power cord from the wall outlet or from the unit. Wait about 10 seconds before plugging it back in. Allow about 3 min for it to start back up and re-connect to the internet automatically.

We recommend performing the power off/on maintenance for your router every 30 to 60 days or anytime you see unusual behavior.

Test your speed

Once you are ready to test things out, head to Telco.com/speedtest and give it a go. For best results, run it when nothing else is using the internet connection at the time.

You do not need to specify the city. It should default to one near your location.